Our Recommended Finish Cycles
1K Standard Finish Cycle
W-414TWPFO0414
1K WHITE THIXOTROPIC PRIMER
Excellent Coverage (1 Coat Coverage)
Excellent Vertical Hang
Excellent Sanding
Dry to Sand: 30-45 Minutes**
W-5000WPSM5000
1K/2K* WHITE TOPCOAT
Excellent Coverage (1 Coat Coverage)
Excellent Leveling
Good Durability
Dry to Sand: 30-45 Minutes**
Surface Preparation
| Sand Unfinished Substrate with 150-180 Grit Abrasive MDF/HDF: Sand Unfinished Substrate with 320-400 Grit Abrasive Recommended and Verified: 3×4 Hook & Loop Film Sheet 180 Grit – SP3X4HLF0180.4 |
Coating Application
| Apply W-414T 1K @ 3-4 wet-mills Recommended and Verified: TriTech: T4 w/Hopper | Tip: 408 | Fluid: 1750psi | No Reduction Apollo: 7700GT | Needle: 1.5 | Air Cap: B-Gold |
Surface Preparation
| Sand Primed Substrate with 220-320 Grit Abrasive MDF/HDF: Sand Primed Substrate with 320-400 Grit Abrasive Recommended and Verified: 3×4 Hook & Loop Film Sheet 320 Grit – SP3X4HLF0320.4 |
Coating Application
| Apply W-414T 1K @ 3-4 wet-mills Recommended and Verified: TriTech: T4 w/Hopper | Tip: 408 | Fluid: 1750psi | No Reduction Apollo: 7700GT | Needle: 1.5 | Air Cap: B-Gold |
Surface Preparation
| Sand Primed Substrate with 220-320 Grit Abrasive MDF/HDF: Sand Primed Substrate with 320-400 Grit Abrasive Recommended and Verified: 3×4 Hook & Loop Pad 280-320 Grit – SPMFP3X.4 |
Coating Application
| Apply W-5000 1K @ 3-4 wet-mills Recommended and Verified: TriTech: T4 w/Hopper | Tip: 408 | Fluid: 1750psi | No Reduction Apollo: 7700GT | Needle: 1.5 | Air Cap: B-Gold |
W-414T: No Pot Life | W-5000: Use Stock White 10 Sheen/No Pot Life as 1K/*2K is OPTIONAL for added performance | **Verified: 4-wet-mills @ 75 F| 45% 32 minutes
2K Standard Finish Cycle
W-415WPFO0415
2K* WHITE THIXOTROPIC PRIMER
Excellent Coverage (1 Coat Coverage)
Excellent Vertical Hang
Excellent Sanding
Dry to Sand: 30-45 Minutes**
W-5000WPSM5000
1K/2K* WHITE TOPCOAT
Excellent Coverage (1 Coat Coverage)
Excellent Leveling
Good Durability
Dry to Sand: 30-45 Minutes**
Surface Preparation
| Sand Unfinished Substrate with 150-180 Grit Abrasive MDF/HDF: Sand Unfinished Substrate with 320-400 Grit Abrasive Recommended and Verified: 3×4 Hook & Loop Film Sheet 180 Grit – SP3X4HLF0180.4 |
Coating Application
| Apply W-415 2K @ 3-4 wet-mills Recommended and Verified: TriTech: T4 w/Hopper | Tip: 408 | Fluid: 1750psi | No Reduction Apollo: 7700GT | Needle: 1.5 | Air Cap: B-Gold |
Surface Preparation
| Sand Primed Substrate with 220-320 Grit Abrasive MDF/HDF: Sand Primed Substrate with 320-400 Grit Abrasive Recommended and Verified: 3×4 Hook & Loop Film Sheet 320 Grit – SP3X4HLF0320.4 |
Coating Application
| Apply W-415 2K @ 3-4 wet-mills Recommended and Verified: TriTech: T4 w/Hopper | Tip: 408 | Fluid: 1750psi | No Reduction Apollo: 7700GT | Needle: 1.5 | Air Cap: B-Gold |
Surface Preparation
| Sand Primed Substrate with 220-320 Grit Abrasive MDF/HDF: Sand Primed Substrate with 320-400 Grit Abrasive Recommended and Verified: 3×4 Hook & Loop Pad 280-320 Grit – SPMFP3X.4 |
Coating Application
| Apply W-5000 2K @ 3-4 wet-mills Recommended and Verified: TriTech: T4 w/Hopper | Tip: 408 | Fluid: 1750psi | No Reduction Apollo: 7700GT | Needle: 1.5 | Air Cap: B-Gold |
W-415: 2 Hour Pot Life | W-5000: 2 Hour Pot Life/Use Stock White 10 Sheen*2K PERFORMANCE add 10% W-350 Catalyst | **Verified: 4-wet-mills @ 75 F| 45% 32 minutes
2K SoftMatt Finish Cycle
W-415WPFO0415
2K* WHITE THIXOTROPIC PRIMER
Excellent Coverage (1 Coat Coverage)
Excellent Vertical Hang
Excellent Sanding
2-coats recommended
Dry to Sand: 30-45 Minutes**
W-8000WPSM8000
2K* SOFTMATT WHITE TOPCOAT
Excellent Coverage (1 Coat Coverage)
Excellent Leveling
Good Durability
Reduce 5-15% Water as needed
1-coat recommended
Dry to Sand: 24 Hours
Surface Preparation
| Sand Unfinished Substrate with 150-180 Grit Abrasive MDF/HDF: Sand Unfinished Substrate with 320-400 Grit Abrasive Recommended and Verified: 3×4 Hook & Loop Film Sheet 180 Grit – SP3X4HLF0180.4 |
Coating Application
| Apply W-415 2K @ 3-4 wet-mills Recommended and Verified: TriTech: T4 w/Hopper | Tip: 408 | Fluid: 1750psi | No Reduction Apollo: 7700GT | Needle: 1.5 | Air Cap: B-Gold |
Surface Preparation
| Sand Primed Substrate with 220-320 Grit Abrasive MDF/HDF: Sand Primed Substrate with 320-400 Grit Abrasive Recommended and Verified: 3×4 Hook & Loop Film Sheet 320 Grit – SP3X4HLF0320.4 |
Coating Application
| Apply ****W-415 2K @ 3-4 wet-mills Recommended and Verified: TriTech: T4 w/Hopper | Tip: 408 | Fluid: 1750psi | No Reduction Apollo: 7700GT | Needle: 1.5 | Air Cap: B-Gold |
Surface Preparation
| Sand Primed Substrate with 220-320 Grit Abrasive MDF/HDF: Sand Primed Substrate with 320-400 Grit Abrasive Recommended and Verified: 3×4 Hook & Loop Pad 280-320 Grit – SPMFP3X.4 |
Coating Application
| Apply W-8000 2K @ 3-4 wet-mills Recommended and Verified: TriTech: T4 w/Hopper | Tip: 408 | Fluid: 1750psi | No Reduction Apollo: 7700GT | Needle: 1.5 | Air Cap: B-Gold |
W-415: 2 Hour Pot Life | W-8000: 2 Hour Pot Life/Use Stock White 10 Sheen*2K PERFORMANCE add 10% W-601 Catalyst | **Verified: 4-wet-mills @ 75 F| 45% 32 minutes | ****NOTICE: W-415 Primer MUST dry 24 hours before applying W-8000 Topcoat
2K Self-Seal Finish Cycle - Open Pore Effect
W-5000WPSM5000
2K* WHITE TOPCOAT
Excellent Coverage (1 Coat Coverage)
Excellent Sanding
Dry to Sand: 1 Hour**
Surface Preparation
| Wire Brush unfinished substrate |
Coating Application
| Apply W-5000 2K White Topcoat by HVLP @ 3 wet-mills Reduce 40%-50% Water Retard 5%-10% W-226 Wipe coating into open-pores and remove excess coating Let Dry for 1 Hour |
Surface Preparation
| Scuff-Sand Surface with 320 Grit Abrasive Recommended: 3×4 Hook & Loop Pad 320 Grit – SPMFP3X.4 |
Coating Application
| Apply W-5000 2K White Topcoat by HVLP @ 3-4 wet-mills Reduce 30% Water Retard 5% W-226 Let Dry for 1 Hour |
Surface Preparation
| Scuff-Sand Surface with 320 Grit Abrasive Recommended: 3×4 Hook & Loop Pad 320 Grit – SPMFP3X.4 |
Coating Application
| Apply W-5000 2K White Topcoat by HVLP @ 3-4 wet-mills Reduce 30% Water Retard 5% W-226 |
W-5000: 2 Hour Pot Life/2K Standard Add 5% W-350 Catalyst